ADVERTISEMENT
**Good Tips for Handling a Phone Stuck in Water: What to Do and What Not to Do**
Accidents happen, and one of the most common mishaps in today’s tech-driven world is dropping a phone in water. Whether it’s the sink, the toilet, the pool, or a puddle, a waterlogged phone can lead to panic. However, how you handle the situation in the first few minutes can make all the difference in saving your phone.
In this article, we’ll walk you through the essential steps to take when your phone is stuck in water and share some tips to help you avoid the most common mistakes.
### Step 1: **Act Quickly! Time is of the Essence**
As soon as your phone hits the water, every second counts. The longer it stays submerged, the more likely it is that the internal components will be damaged. To give your phone the best chance of survival, here’s what you should do immediately:
1. **Turn Off the Phone**:
If your phone is still on after the water incident, power it down immediately. If it’s turned off already, don’t try to turn it on. This prevents electrical shorts, which can occur when power is running through wet components.
2. **Remove the Phone from Water**:
Get your phone out of the water as soon as possible. The longer it stays submerged, the more water it will absorb, which increases the chances of damaging internal parts like the battery or screen.
3. **Remove Accessories and Attachments**:
Take off any accessories like cases, screen protectors, or headphones that may trap water. Also, remove the SIM card and memory card, as these could be damaged and will help in the drying process.
### Step 2: **Dry the Exterior**
Once the phone is out of the water, dry the exterior thoroughly:
1. **Wipe the Phone Down**:
Use a lint-free towel or cloth to gently blot the exterior of the phone. Avoid wiping, as this can push water into the device, especially around the buttons, ports, and screen edges.
2. **Avoid Using Heat Sources**:
Don’t use a hairdryer, oven, or any other heat sources to dry your phone. High temperatures can cause further damage to the phone’s delicate components, including the screen and battery.
### Step 3: **Dry the Internal Components (Optional)**
If you’re comfortable with disassembling your phone (or if it’s an old device), you can remove the battery to prevent any potential short circuiting. If you don’t feel confident doing this, it’s best to skip this step and leave it to the professionals.
### Step 4: **Use a Desiccant (Rice is Not Your Best Option)**
Many people have heard the “rice trick”—placing the phone in a bowl of rice to absorb moisture—but there’s a better way:
1. **Use Silica Gel or a Desiccant Pack**:
Instead of rice, it’s more effective to use silica gel packets, which are designed to absorb moisture. You can find these packets in boxes of shoes, electronics, and other products. Seal your phone and the packets in an airtight bag or container for 24-48 hours. This method is much more effective than rice at absorbing moisture from the device.
2. **Avoid Submerging in Rice**:
If silica gel isn’t available, rice can be used as a last resort. However, it’s not the best method because it’s less effective and might leave dust or grains inside your phone.
For Complete Cooking STEPS Please Head On Over To Next Page Or Open button (>) and don’t forget to SHARE with your Facebook friends
ADVERTISEMENT
