ADVERTISEMENT
#### **Step-by-Step Guide**:
1. **Prepare the Cleaning Solution**:
– In a bowl or bucket, mix **2 tablespoons of dish soap** with **2 cups of warm water**. Stir well until the soap dissolves. If you have stubborn grease, add **1 tablespoon of baking soda** to the mixture to boost its grease-fighting power.
2. **Spray or Apply the Solution**:
– If you’re using a **spray bottle**, pour the solution into the bottle and spray it generously onto the surface of the extractor hood, focusing on the greasy areas. If you don’t have a spray bottle, use a microfiber cloth to apply the solution directly to the surface.
3. **Let the Solution Sit**:
– Allow the cleaning solution to sit on the extractor hood for about **10-15 minutes**. This will give the dish soap time to break down the grease and grime, making it easier to wipe away.
4. **Scrub and Clean**:
– After letting the solution sit, use a **soft sponge** or microfiber cloth to gently scrub the surface of the hood. The grease should lift away with minimal effort. For stubborn spots, add a little **baking soda** directly to the sponge to create a gentle abrasive that will tackle those tough areas.
5. **Use Vinegar for Extra Shine**:
– For added shine and to break down any remaining residue, spray **white vinegar** over the cleaned areas. The vinegar will react with the soap and baking soda, leaving your extractor hood spotless and shining.
6. **Wipe Clean**:
– After scrubbing, use a clean, damp cloth to wipe away all the cleaning solution and grease. Be sure to remove all residue to leave a streak-free finish.
7. **Buff the Surface**:
– For a final touch, use a **dry microfiber cloth** to buff the surface of the extractor hood, giving it a polished, streak-free shine.
—
### 🍋 **Why Does This Trick Work So Well?**
This method works so effectively because of the combination of **dish soap**, **baking soda**, and **vinegar**. Dish soap is excellent for breaking down grease, while **baking soda** adds an abrasive effect to help lift stubborn grime. **Vinegar**, being acidic, helps to cut through grease and also leaves the surface shiny without harsh chemicals.
Additionally, using **warm water** ensures that the cleaning solution is activated quickly, and the **microfiber cloth** or soft sponge ensures that you don’t damage the surface of the extractor hood while scrubbing.
—
### 🌿 **Benefits of Using This Simple Trick**
– **No Disassembly Required**: You don’t need to remove filters or disassemble the hood. This simple cleaning trick allows you to maintain your extractor hood’s cleanliness with minimal effort.
– **No Harsh Chemicals**: This method relies on natural ingredients like dish soap, vinegar, and baking soda—no need for harsh chemicals that can damage surfaces or harm your health.
– **Effective and Quick**: The process takes less than an hour and is incredibly effective at removing grease and grime buildup.
– **Cost-Effective**: You likely already have these ingredients in your home, so you won’t need to buy expensive cleaners or products.
—
### 🌟 **Bonus Tip: Clean the Filters without Removing Them**
While this article focuses on cleaning the external parts of the extractor hood, it’s also important to clean the filters periodically. Here’s how you can clean the filters **without disassembling** them:
1. **Spray Vinegar Solution**: Mix **equal parts vinegar and water** in a spray bottle and spray the filters with the solution.
2. **Let It Sit**: Allow the solution to sit for **10-15 minutes** to break down the grease.
3. **Wipe Down**: Use a microfiber cloth to wipe away the grease and grime from the filters.
This method helps to maintain the filters’ effectiveness without having to remove them, making the process even easier.
—
### 🏠 **Final Thoughts: Easy Maintenance for a Clean Kitchen**
Keeping your extractor hood clean doesn’t have to be a complicated or time-consuming task. With this **simple trick**, you can maintain a clean and functioning extractor hood with minimal effort. Not only does it save you time, but it also helps improve the air quality in your kitchen and ensures that your hood works efficiently.
By using basic household ingredients, you can avoid the hassle of disassembling parts and still get impressive results. So, the next time your extractor hood starts to look a little grimy, skip the disassembly and try this simple cleaning method—you’ll be amazed at how easy and effective it is!
—
**Have you tried this cleaning trick for your extractor hood?** Share your experience in the comments, or let us know if you have any other cleaning hacks that you swear by!
ADVERTISEMENT
